LAWN & GARDEN EQUIPMENT::
STUMP GRINDER VERMEER SC292 #1

Where to find STUMP GRINDER  VERMEER SC292  1 in Durango

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: VERMEER
Model: SC292
4 Hour: $165.00
Daily: $220.00
Weekly: $880.00
Comments:
  • This is the last time your going to trip on that tree stump! Designed with safety in mind, this Stump Cutter/Grinder is easy to operate and maneuver. Starts easier with the electronic fuel injected 26.5 hp (19.8 kW) EFI Kohler engine. Move easily between stumps with the selectable two-speed ground drive. Time to eliminate those stumps like they were never there! Comes on its own trailer, 2" ball to tow!
  • Length 110"
  • Width 49.8"
  • Height 52"
  • Overall Width Transport (without duals) 35"
  • Overall Width Transport (with duals) 49.8"
  • Overall Height Transport 52"
  • Weight - Engine Option One 1285 lbs
  • Sound Power 105.4
  • Engine Option One
  • Make and Model Kohler Command Pro EFI
  • Number of Cylinders 2
  • Gross Horsepower (Maximum) 26.5 hp
  • Torque (Max) 44.3 ft-lb
  • Fuel Tank Capacity 6 gal
  • Max Fuel Consumption 2.7 gph
  • Fuel Type Gas
  • Air Cleaner Dry-type safety element and restriction indicator
  • Oil Filter Spin on
  • Recommended Oil 10W30 Kohler
  • Oil Volume with Filter 2 qt
  • Cooling Medium Air
  • Alternator 20 amp
  • Clutch Type Electric clutch with brake
  • Cutterwheel System
  • Cutterwheel Diameter without Teeth 17"
  • Cutterwheel Thickness .5"
  • Cutterwheel Speed 1400 rpm
  • Cutterwheel Straight Line Dimension 47"
  • Cutterwheel Cut Above Ground 24"
  • Cutterwheel Cut Below Ground 15"
  • Tooth Description Yellow Jacket cutter system
  • Number of Teeth 16
  • Number of Indexes 2
  • Number of Pockets 16
  • Reversible Pockets 16
  • Cutterwheel Guard Standard
  • Chip Containment 7.7 cu ft
  • Cutterwheel Drive Components
  • Belt Type V-Belt
  • Number of Primary Belts 2 individual (matched pair)
  • Jackshaft Dimension 1.3
  • Jackshaft Bearing Type Sealed ball
  • Bearing Dimensions 1.3 bore
  • Number of Secondary Belts 6 Banded
  • Cutterwheel Shaft 1.8"
  • Bearing Dimensions - Secondary Belt 1.8" (4.8 cm) double spherical roller pillow block
  • Hydraulic System
  • Tank capacity 4 gal
  • Recommended Oil Type Vermeer HyPower 68
  • System Type Open-loop series system
  • Filtration Method Pump suction strainer (100 mesh) and 6 micron return filter
  • Pump Flow at Maximum RPM 3.7 gpm
  • System relief pressure 2030 psi
  • Flow Control AutoSweep (option) or 2 speed ground drive
  • Directional Control Manual hydraulic valve
  • Electrical System
  • System Voltage 12 V
  • Battery 400 CCA
  • Standard Gauges Hourmeter
  • Warning Lights Oil pressure, engine fault, operator presence status, clutch engage/disengagement status
  • Switches Two-speed ground drive, clutch engage/disengage, operator presence handles
  • Controller Vermeer ACS
  • Shutdown System Oil pressure shutdown
  • Chassis
  • Frame Description Welded tube and plate steel
  • Control Station Description Fixed side locations
  • Toolbox Description Standard
  • Hitch Type Adapter for TLR25 trailer
  • Steerable Axle Type Manual single wheel or dual hydraulic steering axle
  • Tires - Option One 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard
  • Fender Description Yes
  • Axle/Suspension Rigid/Fixed
  • Ground Drive
  • Low Speed Travel 66 ft/min
  • High Speed Travel 133 ft/min
Add of the above items to my quote request
for a period of   4 hour(s)   day(s)   week(s)  





Also check the following item(s) related to the above:
* Prices are subject to change. Please call us for our special monthly rates.

* Please call us for any questions on our stump grinder vermeer sc292 1 rentals in Durango CO, LaPlata County, Mancos, Ignacio, Cortez, Bayfield, Pagosa Springs, and Silverton CO.
 
 

Copyright 2019 RentalHosting.com

Powered by Point-of-Rental - Last Update: 9/19/2019 3:45:13 AM