LAWN & GARDEN EQUIPMENT

STUMP GRINDER


	Image for reference only Actual item may look different Click on image for larger view

Manufacturer: VERMEER

Model: SC292

4 Hour: $173.00

Daily: $231.00

Weekly: $924.00

Quantity: for a period of
4 hour(s) day(s) week(s)

Additional Information

This is the last time your going to trip on that tree stump! Designed with safety in mind, this Stump Cutter/Grinder is easy to operate and maneuver. Starts easier with the electronic fuel injected 26.5 hp (19.8 kW) EFI Kohler engine. Move easily between stumps with the selectable two-speed ground drive. Time to eliminate those stumps like they were never there! Comes on its own trailer, 2" ball to tow!
Length 110"
Width 49.8"
Height 52"
Overall Width Transport (without duals) 35"
Overall Width Transport (with duals) 49.8"
Overall Height Transport 52"
Weight - Engine Option One 1285 lbs
Sound Power 105.4
Engine Option One
Make and Model Kohler Command Pro EFI
Number of Cylinders 2
Gross Horsepower (Maximum) 26.5 hp
Torque (Max) 44.3 ft-lb
Fuel Tank Capacity 6 gal
Max Fuel Consumption 2.7 gph
Fuel Type Gas
Air Cleaner Dry-type safety element and restriction indicator
Oil Filter Spin on
Recommended Oil 10W30 Kohler
Oil Volume with Filter 2 qt
Cooling Medium Air
Alternator 20 amp
Clutch Type Electric clutch with brake
Cutterwheel System
Cutterwheel Diameter without Teeth 17"
Cutterwheel Thickness .5"
Cutterwheel Speed 1400 rpm
Cutterwheel Straight Line Dimension 47"
Cutterwheel Cut Above Ground 24"
Cutterwheel Cut Below Ground 15"
Tooth Description Yellow Jacket cutter system
Number of Teeth 16
Number of Indexes 2
Number of Pockets 16
Reversible Pockets 16
Cutterwheel Guard Standard
Chip Containment 7.7 cu ft
Cutterwheel Drive Components
Belt Type V-Belt
Number of Primary Belts 2 individual (matched pair)
Jackshaft Dimension 1.3
Jackshaft Bearing Type Sealed ball
Bearing Dimensions 1.3 bore
Number of Secondary Belts 6 Banded
Cutterwheel Shaft 1.8"
Bearing Dimensions - Secondary Belt 1.8" (4.8 cm) double spherical roller pillow block
Hydraulic System
Tank capacity 4 gal
Recommended Oil Type Vermeer HyPower 68
System Type Open-loop series system
Filtration Method Pump suction strainer (100 mesh) and 6 micron return filter
Pump Flow at Maximum RPM 3.7 gpm
System relief pressure 2030 psi
Flow Control AutoSweep (option) or 2 speed ground drive
Directional Control Manual hydraulic valve
Electrical System
System Voltage 12 V
Battery 400 CCA
Standard Gauges Hourmeter
Warning Lights Oil pressure, engine fault, operator presence status, clutch engage/disengagement status
Switches Two-speed ground drive, clutch engage/disengage, operator presence handles
Controller Vermeer ACS
Shutdown System Oil pressure shutdown
Chassis
Frame Description Welded tube and plate steel
Control Station Description Fixed side locations
Toolbox Description Standard
Hitch Type Adapter for TLR25 trailer
Steerable Axle Type Manual single wheel or dual hydraulic steering axle
Tires - Option One 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard
Fender Description Yes
Axle/Suspension Rigid/Fixed
Ground Drive
Low Speed Travel 66 ft/min
High Speed Travel 133 ft/min

Also check the following item(s) related to the above:

RECEIVER HITCH W/ BALL RENTAL

* Prices are subject to change. Please call us for our special monthly rates.

* Please call us for any questions on our stump grinder rentals in Durango CO, Cortez CO, LaPlata County, Mancos, Ignacio, Bayfield, Pagosa Springs, and Silverton CO.